FISHER CZ 5

The Fisher CZ-5 metal detector is easy to use, just turn on and go with pre-set control markings. It offers three tone audio target ID, big target alert, depth reading, push button pinpointing, wet-sand operation, deep-target audio boost and a built in speaker. It uses two 9V batteries for up to 20 hours of operation and comes standard with a 3-piece breakdown handle for easy transport. Plus, the control box can be handle or hip mounted.

The Fisher CZ-5 metal detector Controls

Disc Eight position potentiometer. Seven pre-set discrimination points plus all-metal auto tune position.

Pinpoint Pushbutton for pinpointing, depth reading and ground balancing (in conjunction with ground control).

Sensitivity/Battery Test Dual function potentiometer and switch.

Ground Ground balance potentiometer.

Mode Two-position switch: “Normal” position and “Salt” position for wet, salt-water beaches.

Power ON/OFF Volume Dual-function potentiometer and switch. Volume settings above midrange amplify faint, deep target sounds and limit loud target responses.

The Fisher CZ-5 metal detector Features

Visual target ID

Three tone, audio target ID

Two-frequency, Fourier Domain Signal Analysis

Built in Speaker

Pushbutton ground adjust

Big target alert

Increased depth in mineralized soil

Turn-on-and-go, pre-set control markings

Wet sand mode

Three piece breakdown handle

Faint target audio boost

Eight-inch, open center Spider Coil

Drop-in batteries

Handle mount or hip mount

Silent-search, VLF, slow motion discrimination