Eagle Probe       Sensitivity control Target ID light Recovery light Runs off one standard PP3 9volt battery	£29.00  (Includes Postage) U.K
	Bounty Hunter Probe   Easy to use with single knob control to adjust sensitivity and features audio signal indicator and vibrator. The Probe is small and light for easy handling and carrying.  Runs on one 9v battery.	£36.00  (Includes Postage) U.K
	Detector Pro Pistol Pinpoint Probe The most powerful probe available! Features:   Deep Seeking Circuitry Powered by (2) 9V Batteries Momentary On/Off Power Push-button Switch for Battery Conservation Protected Control Settings Two Preset Piezo Audio Volume Levels Dual LED Visual Indicators Selectable Silent LED Only Operation Low Battery Alert 6-1/2 in. Probe Barrel Length Balanced Comfortable Grip Shape Belt Mounted Holster (included)	£145.00  (Includes Postage) U.K
	Treasure Mate Probe Great depth on small finds Comes with Finds bag-Holster for Probe-Battery FREQUENCY: 16.5khz COIL: 3/8" coax SIGNAL: (1)LED and Speaker (2) LED and Vibrator SETTINGS: Ground Balance and Tuning Controls BATTERY: 9 Volt BATTERY LIFE: 30~50 Hours WEIGHT: 6 Ounces Overall length: 11.5" Probe length:    6.5" TEMPERATURE RANGE: 30~100 Degrees F HUMIDITY: 0~70% MODE: All Metal, Variable Range Tuning Water-Proof Probe (Knobs are not Waterproof) Manufactured by Tesoro Electronics	£135.00  (Includes Postage) U.K
	Vibro Probe FEATURES * Pulse Induction (PI) technology * Tilt on & off * Tip-only detection * Communicates with vibration * Automatic calibration * Low-battery indicator * Waterproof - Submersible to 100 feet (30 meters) * Auto-off (after one minute) battery saver No push button switches. The Vibra-Probe 580 uses our unique tilt-on/off technology in addition to our traditional one-minute automatic-off battery saver. This translates into faster recovery times and longer battery life. The only pinpointer with tip only detection, so you know precisely where the target is. Comes with-Holster for Probe-Battery-Instuctions	£120.00  (Includes Postage) U.K     Currently out of stock
	Explorer/E-Trac/Safari/Quattro Sunray Probe Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, ground and moisture conditions! Light weight, waterproof/submersible 1" X 9" probe. Comes with  a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation, and mounts nicely along the Explorer's battery compartment or on top of upper shaft. Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft! While the X-1 probe is waterproof the switch box is water resistant and must not be submersed. X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc. Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only. Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time. No external buzzers or lights are needed as all targets are heard clearly through your detector headphones! No extra batteries required as the X-1 utilizes the detectors power source. Complete installation & operation instructions included.	£195.00  (Includes Postage) U.K Currently out of stock
	Whites DFX/MXT/M6 Sunray Probe Fully compatible with the DFX, MXT and M6 models! The DX-1 is precision built to ensure peak performance on either model! Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions! Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft. The DX-1 probe and cable weigh approximately 6 oz. The DX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total! While the DX-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.) The DX-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.) High quality custom made, durable probe and connector cable used with identical specifications as White's cable for precision performance! Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs). Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time. The DX-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting. No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones! No extra batteries required as the DX-1 utilizes the detectors power source	£145.00  (Includes Postage) U.K
	Fisher F-75 & F-70  Sunray Probe Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, operation modes,  ground and moisture conditions! New compact, light weight, waterproof/submersible 6" X 1" diameter probe mounts nicely along arm rest for easy access. FX-1 probe and cable weigh approx. 5 oz. FX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 10 oz total! While the FX-1 probe is waterproof the switch box is water resistant and must not be submersed. Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips. The FX-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!  High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation. Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation  Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time. FX-1 switch box is conveniently mounted  on detector pole in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting. No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones! No extra batteries required as the FX-1 utilizes the detectors power source. Complete installation & operation instructions included	£145.00  (Includes Postage) U.K